Fill and Base Material Delivered in Long Beach, WA

If your lot sits low and soft, what do you put under the slab or the drive? For gravel and aggregate delivery in Long Beach, WA, Washington Rock Supply starts with the material that answers that question: 5/8 minus, the crushed surfacing top course with the fines left in.

Along the outer coast the ground runs to sand, peat and tidal silt. That is a wet, shifting base, and it is why fill and sub-base come first here.

Delivery to Long Beach and the Surrounding Area

You order online and pick a quantity by the ton or by the yard. Each product page has a calculator if you want to size the load before checkout.

Choose your delivery date at checkout, and a dump truck tips the material on site in one pile. Delivery covers Long Beach and the rest of Pacific County, including Raymond, Ocean Park, South Bend, Ilaco and Naselle.

Materials for Long Beach Projects

Raising grade and building up a pad is the job this ground asks for. Fill and sub-base go down first, then a surfacing course on top.

For a driveway or parking pad

Start with 1 1/4 Minus, the crushed surfacing base course. It carries load and stays workable on soft, wet ground.

Top it with 5/8 Minus, the crushed surfacing top course. The fines are left in, so it packs hard and sheds water instead of soaking it up.

For a patio or paver area

Bed the pavers in Stone Screenings, also called crusher dust. It is a minus product, so it compacts rather than drains.

For joints and a washed setting bed, use 3/8" Crushed Stone, which is fines-free and drains.

For a drain or a wet low spot

Drain Rock, called 7/8 clean locally, is washed with no fines. It keeps its voids where water sits.

Below a slab or around a pipe, 3/4" Crushed Stone is the washed counterpart to a minus product, so it drains instead of compacting.

Ground and Conditions in Long Beach

Across the Olympic Peninsula and the Pacific coast, the ground runs to sand, peat and tidal silt. Thin, stony soil over marine rock shows up on the slopes, and deep organic forest soil sits in the valleys.

Water is the driver. This part of the state takes 100 to 170 inches of rain a year, so the question is never whether water arrives but where it goes.

Ground that is already saturated will not hold a base course without a drainage layer under it. That is why a drain rock layer belongs under the structural course on a wet site.

The reliable dry window is mid to late summer, with a long wet season either side. The two-day soil stabilization rule for western Washington runs from October 1 through April 30, and on the coast that sets the practical limit on open grade.

Winters stay mild and hard freezes are short, so temperature rarely stops work. Frost depth is set by the county or city building department.

Questions About Ordering in Long Beach

What is the best base under pavers in Long Beach?

Use 1 1/4 minus as the structural course, then bed the pavers in crusher dust, the local name for screenings. Crusher dust is a minus product, so it compacts rather than drains and gives you a firm setting bed.

For joints and any permeable section, switch to 3/8 clean, a washed stone with the fines taken out.

Do you supply contractors working in Long Beach?

Yes. Washington Rock Supply delivers bulk gravel, sand, topsoil and aggregates to job sites in Long Beach and across Pacific County, including Raymond, Ocean Park, South Bend, Ilaco and Naselle.

You order online, choose a quantity by the ton or by the yard, and pick a delivery date at checkout. A dump truck tips the load on site.

Order Fill and Base Material for Your Long Beach Site

On ground that is low, soft or wet, the work starts below the surface. Order 5/8 minus for the top course and 1 1/4 minus for the structural course beneath it, and add drain rock where water needs somewhere to go.

Choose your quantity and your delivery date online, and Washington Rock Supply will bring it to your site.